Wansview Wireless Home Camera, WiFi IP Security Surveillance System for Baby/Elder/Pet/Nanny Monitor with Night Vision K2 4Pack

Item No.: 1891
Quick and Easy setup: Using “Wi-Fi configuration Guide” via Wansview App so as to connect your Wi-Fi with camera, no complicated setting needed of this wireless surveillance camera.Important tips before connection:IP/Network-2.4GHz Wireless(Incompatible w
Description Here's how it works
A set of the camera with 4 cameras can be 4 set of your eyes. With Wansview 4 pack home cameras, user can watch what they want anytime anywhere freely. They can be baby camera, nanny camera and pet camera or home camera.

With the built-in microphone and speaker on the camera, you can not only listen and talk with your family members through the Wansview mobile app and PC software to see and hear what's happening at home immediately , but experience a smooth conversation anytime, anywhere Just like you are at home.

With 4 pcs IR lights, the camera can automatically get into night vision mode when the light gets darker, so you can see clearly in the pitch dark night.
 
Using our free Wansview app or PC software, you can check what was happening easily, capture your cherished pictures or videos to your mobile phone for future view, schedule 24/7 recordings on the Wansview PC Software allows you to playback all the important moments of your loved ones.


1:Wifi requirement
1) 2.4G WiFi, If it is dual band, it is better to hide the 5G WiFi first, after setup, turn the 5G on.
2) WiFi SSID and password cannot contain special characters ' and &.

2: Steps
1) Download Wansview APP from App Store (iOS) or Google Play (Android)
2) Power for Camera near your router
3) Add camera
Run the Wansview App, tap ”+” and select “Add Camera via WiFi mode” to set up it step by step.

3: Important Tips:
1) Plug the camera near your router
2) Mobile phone must be connected with 2.4G wifi 
3) When you add the camera, keep "admin" as login name and "123456" as the default password. 
4) Input the correct WiFi password
5) Set up it within 5 minutes after powering the camera on

Note:
1) If failed, please try to hold down the"Reset" button around 15-20 seconds until you see the red light flashes quickly and hear a beep. Then repeat the above steps to set up again.
2) Once the camera is connected with WiFi, and shows "online" on Wansview app, you can move it to other places where has a good wifi receiption.
1:Wifi requirement
1) 2.4G WiFi, If it is dual band, it is better to hide the 5G WiFi first, after setup, turn the 5G on.
2) WiFi SSID and password cannot contain special characters ' and &.

2: Steps
1) Download Wansview APP from App Store (iOS) or Google Play (Android)
2) Power for Camera near your router
3) Add camera

Send your message to us